A Kondwi kondwi drive requires two gears for operation. Both gears are spur cut, and the drive gear receives drive from the energy output. The drive equipment then transfers power to the driven gear.
Different Drive Systems
All drive systems require a drive gear. The drive equipment is the primary transfer from the energy source to the driven gear. A belt from the drive gear to the driven gear is a “belt driven” system. Another option may be the “chain driven” system. The “chain driven” system runs on the chain from the drive gear to the driven gear. The “gear drive” system is direct gear-drive. The drive gear is directly meshed with the powered gear.
Gear drives are used in transmissions, back ends and transfer instances; at times the drive gear will be smaller than the driven gear. Different gear ratios enable the transmission to shift to lower or more rpm speeds.
Automotive gear drive
Gear drives are used on automotive engines. A “gear drive” usually identifies the timing drive; it replaces the normal timing-chain with spur-cut gears. A gear drive is well known for the “whining sound” it emits. The teeth of the gears mesh jointly as the gears change with the rotation of the engine. This helps to keep the engine in time.