0086-571-88220971 [imèl pwoteje]
0 atik

Leaf chains include pins and plates only and are greater in power than roller chains. They may be appropriate for duties like hoisting and pulling. Leaf chains conform to ANSI and also have two sorts: AL and BL.
AL kalite
To the use that static load is utilized with little concern of sporting.
BL type
For your use that dress in resistance is needed considering the fact that impact load is utilized.
Chwa nan chenn fèy
The chain size is selected in accordance to your following formula:
Acting tension?¨¢Service factor¡§QMaximum allowable tension Notes:
1. Acting tension involves the dead bodyweight with the chain, the bodyweight with the attachments and inertia.
2. In case the chain velocity exceeds 30 m/min, use a roller chain.
Dyamèt minimòm poul: SD = anplasman chèn? ¨ ¢ 5
Minimal width concerning flanges: L = All round length of pin?¨¢1.05
? Si koneksyon broch yo ofri: L¡§R2L1? ¨ ¢ 1.05
FD = SD + Pi wo wotè plak lyen (H) Remak:? Si dimansyon H depase 25 kat,
F.D = S.D + 25.4 can be adopted since the minimal flange outer diameter.
Periodical inspection and guidelines for substitute
Be sure you perform periodical inspection and lubrication to confirm security and prolong chain existence. Difficulties and directions for solution are outlined within the following.
Difficulty:Circumferential dress in of plate
Remedy:Exchange the chain if put on reduction gets five % of H.
Dilemma:Oblique dress in of plate and pin head
Alternative:Align the unit.
Nimewo: Pwoteksyon nòmal oswa wotasyon nan tèt peny
Solution:Replace the chain Lubricate and get rid of overload.
Issue:Put on elongation
Option:Exchange the chain when its length becomes 1.03L. Note: Put on elongation of the
chèn diminye pouvwa rupture li yo.
Wear elongation of 3% lowers the tensile strength by 18 percent.
The wear existence of chain is often improved by lubrication. Replace the chain.
Trouble:Cracked plate (1)Crack: Through the hole of a website link plate towards the finish in the website link plate while in the course perpendicular to stress direction.
Alternative:Change the chain which has a chain of larger maximum allowable tension, or decrease the load or dynamic (shock) load.
Issue:Cracked plate (2)Crack: In an oblique course against tension direction.
Solution:Exchange the chain, and defend from corrosive circumstances.
Dilemma:Broken plate(by large tension)
Resolution:Exchange the chain, and do away with the bring about of overload.
Issue:Enlarged plate hole
Solution:Replace the chain, and reduce the trigger of overload.
Issue:Corrosion of pit
Resolution:Replace the chain, and defend from corrosive situations.