0086-571-88220971 [imèl pwoteje]
0 atik

Elastomers nan konpresyon
We delivers 4 styles of elastomer designs to permit for added versatility in addressing unique application prerequisites. 1 piece types are used in the “L” and “AL” designs (called spiders) and many element “load cushions” are used in the “C” and “H” model couplings. The load cushions are in sets of 6 to 14 pieces according to coupling size.
Bonjan Sant Spider
The solid center design is commonly applied style and design when shafts of your driver and driven gear could be kept separate by a regular gap
Louvri Sant Spider
The open center layout allows for that shafts on the driver and driven to be positioned within a brief distance
Open center spiders provide shaft positioning flexibility but possess a decrease RPM capacity
Employed exclusively for that C and H Sort couplings
Load cushions are held in area radially by a steel collar and that is attached to one of the hubs
SNAP vlope fleksib Spider
Design enables for effortless removal in the spider with out moving the hubs
Makes it possible for for near shaft separation all the way up to the hubs greatest bore
Highest RPM is one,750 RPM together with the retaining ring, but if utilised together with the LC Form (with collar) the ordinary RPM rating from the coupling applies
Style is obtainable in NBR and Urethane only, and in constrained sizes
Eleman Spider
SOX (NBR) kawotchou
The typical materials that is really flexible materials that is definitely oil resistant
Resembles normal rubber in resilience and elasticity, and operates proficiently in temperature ranges of -40° to 212° F (-40° to 100° C)
Has 1.5 occasions greater torque capacity than NBR
Great resistance to oil and chemical substances
Materials delivers much less dampening effect and operates at a temperature selection of -30° to 160° F
Flexible elastomer built for large torque and large temperature operations
Opere nan tanperati -60 ° a 250 ° F (-51 ° a 121 ° C)
An kwiv
Rigid, porous, oil-impregnated metal insert solely for minimal pace (max 250 RPM) applications requiring substantial torque abilities
Not affected by water, oil, filth, or extreme temperatures – operates in temperatures of -40° to 450° F (-40° to 232° C)