cycloidal gearbox

Cycloidal gearboxes
Cycloidal gearboxes or reducers contain four fundamental components: a high-speed input shaft, an individual or compound cycloidal cam, cam followers or rollers, and a slow-speed output shaft. The insight shaft attaches to an eccentric drive member that induces eccentric rotation of the cycloidal cam. In substance reducers, the first tabs on the cycloidal cam lobes engages cam followers in the casing. Cylindrical cam followers act as teeth on the internal gear, and the amount of cam fans exceeds the amount of cam lobes. The second track of substance cam lobes engages with cam followers on the result shaft and transforms the cam's eccentric rotation into concentric rotation of the result shaft, thus raising torque and reducing quickness.
Compound cycloidal gearboxes provide ratios ranging from as low as 10:1 to 300:1 without stacking levels, as in standard planetary gearboxes. The gearbox's compound reduction and can be calculated using:
where nhsg = the amount of followers or rollers in the fixed housing and nops = the quantity for followers or rollers in the gradual velocity output shaft (flange).
There are several commercial variations of cycloidal reducers. And unlike planetary gearboxes where variations are based on gear geometry, heat therapy, and finishing procedures, cycloidal variations share basic design principles but generate cycloidal movement in different ways.
Planetary gearboxes
Planetary gearboxes are made up of three fundamental force-transmitting elements: a sun gear, three or more satellite or planet gears, and an interior ring gear. In a typical gearbox, the sun gear attaches to the input shaft, which is connected to the servomotor. Sunlight gear transmits electric motor rotation to the satellites which, subsequently, rotate within the stationary ring equipment. The ring equipment is portion of the gearbox housing. Satellite gears rotate on rigid shafts connected to the earth carrier and cause the earth carrier to rotate and, thus, turn the result shaft. The gearbox gives the result shaft higher torque and lower rpm.
Planetary gearboxes generally have one or two-gear stages for reduction ratios which range from 3:1 to 100:1. A third stage could be added for even higher ratios, but it is not common.
The ratio of a planetary gearbox is calculated using the next formula:
where nring = the number of teeth in the inner ring equipment and nsun = the number of tooth in the pinion (insight) gear.
Benefits of cycloidal gearboxes
• Zero or very-low backlash remains relatively constant during life of the application
• Rolling rather than sliding contact
• Low wear
• Shock-load capacity
• Torsional stiffness
• Flat, pancake design
• Ratios exceeding 200:1 in a concise size
• Quiet operation

Ever-Power Cycloidal Equipment technology is the far superior choice in comparison with traditional planetary and cam indexing products.

Fascinated in learning even more regarding cycloidal gearbox?