0086-571-88220971 [imèl pwoteje]
0 atik

Constant may bwat Kovèti pou
Constant mesh gearbox is a kind of Transmission where all or most of the gears are always in mesh with one another, as opposed to a sliding-gear transmission, in which engagement is definitely obtained by sliding some of the gears along a shaft into mesh. In a constant-mesh manual gearbox, Gear ratios are selected by little Clutches that connect the various gear sets to their shafts so that power is definitely transmitted through them. The next diagram shows the arrangement of a continuous mesh gear box
Konstriksyon ak travay nan yon bwat Kovèti pou may konstan
Constant equipment mesh gearbox employed helical gears for power tranny. The gears are rigidly fixed in the lay shaft. The gears in result shaft rotates freely without engaging with shaft, therefore not transmitting power. The gears in both shafts are generally meshed together.
To activate the gears with output shaft dog clutch can be used. the dog clutch is usually shifted by the seletor fork moved by gear lever.To supply invert gearing a idler equipment is used.
When the apparatus lever is pushed, the gear selector fork pushes the dog clutch. The dog clutch engages the gear and the result shaft, thus power from lay shaft today transmitted to output shaft.
A continuous mesh transmission is a form of manual transmission where sliding gears from the sliding mesh gearbox is replaced with the constantly meshed combines of gears and also the new shifting gadgets named dog clutches sq . measure introduced which helps in transmittal the desired output to the the majority of shaft by creating contact with the acceptable couple of the meshed gears.
A continuous mesh transmission typically comes with 4 forward speeds and 1 reverse manual tranny configuration.
Why will we wish Constant Mesh Transmission?
The introduction of initial transmission system i.electronic. sliding mesh tranny was a great success in cars trade as currently there was a system which can provide needed torsion and swiftness ratios wish by the automobile to face the road challenges however still there were several vital issues with this gear that raised the query on its efficiency and responsibility. the problems long-faced were as follows-
The shifting of gears wasn’t an easy task since the shifting needed a special technique that wasn’t in any respect everybody’s cup of tea, a talented driver was needed for driving such vehicle, the special technique needed being Double-de-clutching.
Note – Double-de-clutching- it’s the technique since the name indicates that needed dual engagement and disengagement of clutch for shifting one gear.
f i.electronic. once driver must shift the gear he preliminary presses the clutch pedal and create the apparatus to the neutral, than once more he releases the clutch pedal and accelerate so as to extend the quickness of the lay-shaft in order that the meshing of applicable gear will take place, save for he presses the clutch pedal and produce the apparatus lever to the desired equipment and unleash the clutch pedal and at last the required gear is obtained.
Since the gears should be meshed square measure in continuous rotation with a totally different speed than the meshing of these gears will cause breakage to the apparatus teethes or continuous wear and tear is there.
The shifting of gears could be a terribly clamant method.High maintenance is needed as slippy and meshing of gears causes resistance to wear of shafts and gears.
Pati prensipal yo
Clutch Shaft.
Lay Shaft or counter Shaft.
Main Shaft.
Dog clutch.
There are different types of gears with both spur and helical gears like:
Clutch gear.
First gear.
Second gear.
Reverse gear.
TRAVAY prensip:
In Continuous Mesh Gearbox gearbox, all gears of the primary shaft are in constantly meshed with the corresponding gears of the layshaft or countershaft. Too dog clutches are provided on the main shaft: one between your clutch equipment and the second gear; and the other between your first gear and reverse gear. The main shaft is manufactured splined and all the gears are absolve to move onto it. Dog clutches can slide on the primary shaft and rotates with it. All of the gears on the countershaft are completely fixed with it.
When the left dog clutch was created to slide left by making use of the gear shift lever, it meshes with the clutch gear and the very best speed gear is obtained. When the still left dog clutch meshes with the second gear on the primary shaft, the next speed equipment is achieved. Similarly, by sliding the right-hand dog clutch left and right, the first speed gear and reverse equipment are attained respectively In this type of gearbox, because all of the gears are in continuous mesh, they are safe from being damaged and unpleasant grinding audio does not take place while engaging and disengaging them.
Continuous mesh gearbox can be used for the smooth working of an automobile. They are accustomed to increase the rotating force (Torque); that is accompanied by a reduction in acceleration. It is a kind of manual transmission. The invention of earliest manual equipment system could be traced back again to the nineteenth century. There are multiple gear ratios present which provides various torque and acceleration ratio. Along with this, the reverse mechanism is also present. This manual transmissions which are developed lately contain all the gears mesh at any provided point of time.
In specialized terms, it can be defined as a gearbox in which all of the gears are always in circumstances of mesh. The gears remain fixed at their unique positions. The gears will remain engaged at all times. Find out more about its structure, working, advantages, drawbacks and applications in this article.
It is made up of following components:
1. Counter shaft or Lay Shaft:
This shaft is in direct contact with the clutch and the main shaft. Remember according to the equipment ratio, the quickness of the counter shaft could be less that the swiftness of the engine. The gear ratio can be defined as the ratio of the teeth of driven gear to one’s teeth of the driver gear.
2. Main shaft:
This shaft operates the speed of the automobile. The power is made available to the main shaft through the gears from the counter shaft. This is done in accordance with the gear ratio.
3. Dog clutch:
Dog clutch is special feature of constant mesh gearbox. It is utilized for the coupling of any two shafts. That is done by interference. Using a dog clutch, different gears could be locked to the output and input shafts.
NAN. Angrenaj yo:
The primary work of the gears may be the transmission of power between the shafts. If the apparatus ratio is more than one, the primary shaft will continue to work at a rate that is slower than the counter shaft, and vice versa. The arrangement of both reverse, as well as forward gears, is present.
Forward gear selection:
From the input shaft, the power starts flowing and is split into four parts. Each part goes to among the result gears, namely initial, second, third and 4th. Gear ratios can be obtained for each of them. This could be done by the correct sliding of dog clutch over one’s teeth of the selected gearwheel. After this the path of the energy movement completes. This happens because of the locking movement of the result shaft.
Reverse gear selection:
The power will flow from the input shaft to the reverse gears. The energy is after that transmitted from the reverse gear to the reverse idler. The idler wheel will change the direction of the rotation. Regarding forwarding direction gear selection, the output gears will rotate in a direction opposite to the insight gears. But in the case of reverse gear selection, the rotation is definitely in the same path as the input shaft.
The steps are taken up to change any gear in the constant mesh gearbox system:
1. The first step when one really wants to modify the gear would be the pressing of the clutch. Following this comes the neutral state of the vehicle to be performed. Proper optimization of the engine’s speed is necessary.
2. After the neutral gear, one moves ahead to the first gear. The first gear. This process is called dual clutching. Inefficiency in executing the above measures might lead to a harsh and gnashing sound.
Advantages and Disadvantages of Constant Mesh Gearbox:
The first and foremost advantage of the constant gear mesh may be the utilization of helical gears. The dual helical gears and the helical gears are really beneficial owing to their quieter operating capabilities
There are numerous conditions which might cause harm. Regarding continuous mesh gearbox, any harm is suffered entirely by your dog clutch teeth. The teeth belonging to the apparatus tires remain intact. This is not the case for sliding mesh equipment box.
The other equipment boxes are noisy and create an undesirable din.
It really is less efficient than the others due to higher mesh teeth. Skill is required for it.
The dual clutch mesh is necessary. This is necessary to possess the spinning actions of the shaft.
Some of the vehicles which use this kind of gearboxes are farm trucks, motorcycles, and heavy machinery.
In this type of gearbox, all the gears of the primary shaft are in continuous mesh with the corresponding gears of the counter shaft or lay shaft.
Two dog clutches are given on the primary shaft i.e. one in between the clutch gear and the second gear, and the additional between the first equipment and the reverse gear.
Your dog clutch can slide on the shaft and rotate with it. While, all of the gears on the counter shaft are rigidly fixed with it.
As so when the left hands dog clutch was created to slide to the left by means of the gear change lever, it meshes with the clutch gear and the top speed equipment is obtained. When the left hands dog clutch meshes with second gear, the next gear is obtained.
Similarly, by sliding right hand dog clutch left and right, the initial speed gear and reverse gear are obtained respectively.
In this kind of gearbox, all the gears are in continuous mesh and hence for this reason, they are secure from being damaged and irritating grinding sound does not occur while engaging and disengaging.

Gade sou entènèt nou an construction and working of constant mesh gearbox galri.